# packages

pkgId: 21faef7a240c51376cf2fa93aa3cb83d883ed7fce1b65b9f796ccf6b4b843f27
name: php-pecl-datadog-trace
arch: aarch64
version: 1.0.0~beta1
epoch: 0
release: 1.el9.remi.8.0
summary: APM and distributed tracing for PHP
url: https://pecl.php.net/package/datadog_trace
rpm_license: (Apache-2.0 OR BSD-3-Clause) AND MIT AND Apache-2.0
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-datadog-trace-1.0.0~beta1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-datadog-trace-1.0.0~beta1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  The Datadog PHP Tracer brings APM and distributed tracing to PHP.

  Documentation: https://docs.datadoghq.com/tracing/languages/php/

  Package built for PHP 8.0.


pkgId: 3cf4d6ef8cec52e874265fcf488c222c7a2663d48d9abbe0f239a41806315163
name: php-pecl-dio
arch: aarch64
version: 0.3.0~RC1
epoch: 0
release: 1.el9.remi.8.0
summary: Direct I/O functions
url: https://pecl.php.net/package/dio
rpm_license: PHP-3.01
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-dio-0.3.0~RC1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-dio-0.3.0~RC1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  PHP supports the direct io functions as described in the
  Posix Standard (Section 6) for performing I/O functions at
  a lower level than the C-Language stream I/O functions
  (fopen(), fread(),..).

  DIO provides functions and stream wrappers which provide raw and
  serial low level IO support.  The use of the DIO functions should
  be considered only when direct control of a device is needed.
  In all other cases, the standard filesystem functions are
  more than adequate.


pkgId: bf9a7854a900e04d0a2d65a186473630a62abcae48692f8082612b3917c148ae
name: php-pecl-event
arch: aarch64
version: 3.1.0~RC1
epoch: 0
release: 1.el9.remi.8.0
summary: Provides interface to libevent library
url: https://pecl.php.net/package/event
rpm_license: PHP-3.01
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-event-3.1.0~RC1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-event-3.1.0~RC1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  This is an extension to efficiently schedule I/O, time and signal based
  events using the best I/O notification mechanism available for specific
  platform. This is a port of libevent to the PHP infrastructure.

  Version 1.0.0 introduces:
  * new OO API breaking backwards compatibility
  * support of libevent 2+ including HTTP, DNS, OpenSSL and the event listener.

  Documentation: http://php.net/event

  Package built for PHP 8.0.


pkgId: 6a52698cada2d9b1128db4d66c88a841301091455e66504fb7afc28b7775d2ba
name: php-pecl-grpc
arch: aarch64
version: 1.66.0~RC3
epoch: 0
release: 1.el9.remi.8.0
summary: General RPC framework
url: https://pecl.php.net/package/grpc
rpm_license: Apache-2.0
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-grpc-1.66.0~RC3-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-grpc-1.66.0~RC3-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  Remote Procedure Calls (RPCs) provide a useful abstraction for building
  distributed applications and services. The libraries in this repository
  provide a concrete implementation of the gRPC protocol, layered over HTTP/2.
  These libraries enable communication between clients and servers using
  any combination of the supported languages

  Package built for PHP 8.0.


pkgId: 860e1c1447f03067ff627847bada6cfe1f4bf54f1c9878ef15130cf18b650142
name: php-pecl-msgpack
arch: aarch64
version: 3.0.0~RC1
epoch: 0
release: 1.el9.remi.8.0
summary: API for communicating with MessagePack serialization
url: https://pecl.php.net/package/msgpack
rpm_license: BSD-3-Clause
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-msgpack-3.0.0~RC1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-msgpack-3.0.0~RC1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  This extension provide API for communicating with MessagePack serialization.

  MessagePack is an efficient binary serialization format. It lets you exchange
  data among multiple languages like JSON but it's faster and smaller.
  For example, small integers (like flags or error code) are encoded into a
  single byte, and typical short strings only require an extra byte in addition
  to the strings themselves.

  If you ever wished to use JSON for convenience (storing an image with metadata)
  but could not for technical reasons (encoding, size, speed...), MessagePack is
  a perfect replacement.

  This extension is still EXPERIMENTAL.

  Package built for PHP 8.0.


pkgId: 9e7445898d5a4c315f5ed8b37db19e6c1b02d4c9a767b7d10594344724b15f9d
name: php-pecl-opentelemetry
arch: aarch64
version: 1.0.3~beta1
epoch: 0
release: 1.el9.remi.8.0
summary: OpenTelemetry auto-instrumentation support extension
url: https://pecl.php.net/package/opentelemetry
rpm_license: Apache-2.0
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-opentelemetry-1.0.3~beta1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-opentelemetry-1.0.3~beta1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  OpenTelemetry auto-instrumentation extension.

  This is a PHP extension for OpenTelemetry, to enable auto-instrumentation.
  It is based on zend_observer and requires php8+

  The extension allows creating pre and post hook functions to arbitrary PHP
  functions and methods, which allows those methods to be wrapped with telemetry.


  Package built for PHP 8.0.


pkgId: 2a0bf4637e220897540891fede279c249d8d09a41c120a146098c32c67489026
name: php-pecl-protobuf
arch: aarch64
version: 3.25.0~RC1
epoch: 0
release: 1.el9.remi.8.0
summary: Mechanism for serializing structured data
url: https://pecl.php.net/package/protobuf
rpm_license: BSD-3-Clause and MIT
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-protobuf-3.25.0~RC1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-protobuf-3.25.0~RC1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  Google's language-neutral, platform-neutral, extensible mechanism for
  serializing structured data.

  See: https://developers.google.com/protocol-buffers/

  Package built for PHP 8.0.


pkgId: 287097c136143c5af2b09e1e68ca11fe3b6ad5d7ef1a8e6288541ea5d5984291
name: php-pecl-redis6
arch: aarch64
version: 6.1.0~RC1
epoch: 0
release: 1.el9.remi.8.0
summary: Extension for communicating with the Redis key-value store
url: https://pecl.php.net/package/redis
rpm_license: PHP-3.01
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-redis6-6.1.0~RC1-1.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-redis6-6.1.0~RC1-1.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  The phpredis extension provides an API for communicating
  with the Redis key-value store.

  This Redis client implements most of the latest Redis API.
  As method only only works when also implemented on the server side,
  some doesn't work with an old redis server version.

  Package built for PHP 8.0.


pkgId: 03930d4e9164dc9b61d2cc56da2595a70aeda22eea41c659aea1beb26374b30e
name: php-pecl-xdebug3
arch: aarch64
version: 3.3.0~alpha3
epoch: 0
release: 2.el9.remi.8.0
summary: Provides functions for function traces and profiling
url: https://xdebug.org/
rpm_license: Xdebug-1.03
rpm_vendor: Remi's RPM repository <https://rpms.remirepo.net/> #StandWithUkraine
rpm_group: Unspecified
rpm_buildhost: builder2.remirepo.net
rpm_sourcerpm: php-pecl-xdebug3-3.3.0~alpha3-2.el9.remi.8.0.src.rpm
rpm_packager: Remi Collet
location_href: php-pecl-xdebug3-3.3.0~alpha3-2.el9.remi.8.0.aarch64.rpm
checksum_type: sha256
description:
  The Xdebug extension helps you debugging your script by providing a lot of
  valuable debug information. The debug information that Xdebug can provide
  includes the following:

  * stack and function traces in error messages with:
    o full parameter display for user defined functions
    o function name, file name and line indications
    o support for member functions
  * memory allocation
  * protection for infinite recursions

  Xdebug also provides:

  * profiling information for PHP scripts
  * code coverage analysis
  * capabilities to debug your scripts interactively with a debug client

  Documentation: https://xdebug.org/docs/

  Package built for PHP 8.0.


